How to Stop Too Many Irrelevant Clicks in Google Ads
If you're seeing too many irrelevant clicks in Google Ads, this guide walks through a repeatable process to confirm the clicks are truly irrelevant, rule out look-alike problems like broken conversion tracking, and find the search terms and settings that drive wasted spend so you can shut them off.
Irrelevant clicks eat budget and give you nothing back: no leads, no sales, just spend. If you're seeing too many irrelevant clicks in Google Ads, this guide gives you a repeatable process to find where they come from and shut them off. You'll need access to a Search campaign with at least a few weeks of click data, and permission to edit keywords and campaign settings.
Step 1: Confirm the clicks are actually irrelevant
An irrelevant click comes from a search term that doesn't match what you sell or the intent you want. That's different from a click that simply didn't convert. A relevant searcher can still bounce, and a perfectly good term may just need more time to show results.
Start with the data before touching anything. Pick a date range with enough clicks to judge, often four weeks or more depending on your volume, and compare cost, clicks and conversions by search term. You're looking for terms where the intent is clearly wrong, not merely quiet.
Then rule out the look-alikes. Several problems can pass for "bad clicks":
- Broken or missing conversion tracking. If conversions aren't recording, every term looks like junk. Confirm your conversion actions are active and firing, for example by submitting a test lead.
- Landing page mismatch. Good searchers leave if the page doesn't deliver what the ad promised.
- Invalid traffic. Bot or accidental clicks look like waste but are a different problem. Google filters some of it and shows invalid click adjustments in your reporting, as of this writing, so check there before blaming search terms.
Finally, write one sentence defining "irrelevant" for this account. For example: "Anyone looking for a job, a free tool, or a product type we don't sell." That sentence keeps your review consistent from one session to the next, and from one team member to another.
Step 2: Open the Search Terms report and sort by spend
In Google Ads, the search terms report lives under the Insights and reports section of the left-hand menu, as of this writing. Google moves menu items around, so if you don't see it, check Google Ads Help for the current path. Set the date range you chose in Step 1.
Sort by cost, or by clicks if cost is close, never alphabetically. The most expensive junk deserves attention first, because a handful of terms usually account for a large share of wasted spend.
Keep the distinction straight: a search term is what the person actually typed, and a keyword is what you bid on. They often differ, especially with broad and phrase match, where your keyword "accounting software" can trigger a search like "free accounting software download". The report is where you see that gap.
One limit to know: Google doesn't show every search term. Some low-volume queries are hidden for privacy reasons, so the report isn't a complete list. Google Ads Help has the current wording on this. Treat what you see as a strong sample, not the whole picture. If the volume feels unmanageable, this walkthrough on what to do when there are too many search terms to review can help you triage.
This is also where Keywordme fits. Its Chrome extension works inside the search terms report, so you can review terms and act on them without exporting to a spreadsheet and pasting things back. You still make every call yourself.
Step 3: Sort search terms into relevant, irrelevant and unclear
Go down the list, starting from the top spenders, and put each term in one of three buckets:
- Keep: matches your offer and intent.
- Exclude: clearly outside what you sell or want.
- Watch: unclear, or too little data to decide.
For example, imagine a company selling accounting software. It sees "free accounting software download" and "accountant jobs near me" and marks both as exclude: one is a free-seeker, the other a job seeker. "Accounting software for freelancers" goes in keep. (This is an illustration, not real account data.)
The common mistake here is excluding a term because it has spend and no conversions yet. Conversions can lag, and a few clicks prove very little. If the intent looks right but the data is thin, it belongs in watch until you have enough evidence. Excluding on a hunch can block traffic you'd have wanted.
As you work, look for patterns by word rather than by individual query. Terms containing "free", "jobs", "course", "DIY", "salary", or a competitor's brand name often repeat across dozens of variations. Each pattern is a negative theme, and handling it once covers many queries, including ones that haven't shown up yet. For more on spotting these, see this guide to finding irrelevant search terms in Google Ads.
Jot the themes down as you go. You'll use them in the next step, and you'll want the same list when you set up your recurring review.
Step 4: Add negative keywords at the right level and match type
Negative keywords stop your ads from showing for matching searches. They're the counterpart to your positive keywords, but they don't work the same way. Notably, negative keywords don't expand to close variants the way positive broad match does, so a negative for "job" won't automatically cover "jobs" or "employment". Confirm the current behavior in Google Ads Help, and add variants you care about explicitly.
Pick the match type deliberately
- Exact negative: blocks one specific bad query. Use it for a one-off term that has no pattern behind it.
- Phrase negative: blocks a bad pattern, such as "free download" appearing in that order within a search.
- Broad negative: blocks searches containing all the words in any order. Use it carefully, since a broad negative like "free trial" could block people searching for your own free trial.
Pick the level
For problems specific to one campaign or ad group, add the negative at that level. For terms that are never relevant anywhere, such as "jobs" or "careers" for most businesses, use a shared negative keyword list or account-level negatives, so you manage them once and apply them across campaigns. Check Google Ads Help for current limits on lists and account-level negatives. If you're unsure how big your lists should get, this piece on how many negative keywords you should have offers a useful frame.
Check for conflicts before saving
A negative that matches one of your own positive keywords will block it. Before you save, scan your active keywords for overlap, especially with broad and phrase negatives. Google Ads also flags some conflicts, but don't rely on that alone.
Keywordme can speed up this part. From the search terms report, you can mark junk terms and apply negative match types in a click, instead of copying terms elsewhere. It applies what you choose; it doesn't decide for you or change campaigns on its own.
Step 5: Tighten the keywords and match types that let junk in
Negatives treat the symptom. The cause is usually a keyword that's too permissive, so trace each bad term back to the keyword that triggered it. In the search terms report, look for the column showing the matched keyword (labeled something like "Keyword" or "Matched keyword" depending on the view and current UI) and group your junk terms by source. This is also the root of why Google matches ads to irrelevant searches in the first place.
Patterns tend to show up fast. Common culprits include:
- Broad match keywords with loose interpretation, especially short or generic ones.
- Vague single-word keywords like "software" or "marketing" that carry many intents.
- Ad groups mixing unrelated themes, so one keyword's traffic lands on the wrong ad and page.
Based on what you saw in Step 3, decide what to do with each offender. A high-risk broad match keyword can move to phrase or exact match, or be paused if it brings mostly junk. A vague keyword can be replaced with more specific versions. A mixed ad group can be split by theme.
Then capture the winners. The "keep" terms you found are proof of real demand, so add them as positive keywords, in the right ad group and with a deliberate match type. That way you're collecting that traffic on purpose rather than hoping a broad keyword keeps catching it.
A caveat: broad match paired with Smart Bidding can perform well when the account has solid conversion data to learn from. The aim here is control, not abandoning broad match. If a broad keyword is converting and its junk is manageable with negatives, you may want to keep it and watch it closely.
Step 6: Check ad copy, location and other settings that attract the wrong clicks
Search terms aren't the only source of bad clicks. Some come from settings and messaging, so check these before calling the job done. If you're still puzzled about the source, this explainer on why your Google Ads are getting wrong clicks covers additional causes.
Ad copy
Your ads can pre-qualify clicks. Mention a price range, who the product is for, or what you don't offer. "Plans from $X, for teams of 10 or more" discourages people who can't or won't buy, and a few unqualified clicks saved can matter more than a slightly higher click-through rate.
Location settings
Check your targeted locations and the location option you've chosen. As of this writing, Google offers choices like "Presence or interest" and "Presence", and the first can show your ads to people outside your area who are interested in it. If you only serve a specific region, the narrower option may fit better. Names and defaults change, so verify in Google Ads Help.
Network settings
Look at whether Search partners is on, and for Search campaigns whether Display expansion is enabled. Both can extend your reach beyond Google Search results. Don't switch them off by reflex; segment performance by network in your own data and decide from there.
Device and schedule
Review device and ad schedule performance only if the data shows a real pattern, such as mobile clicks that consistently go nowhere across a decent sample. If the numbers are thin or mixed, leave them alone. Cutting on a hunch is how good traffic gets lost.
Step 7: Set up a recurring review so junk doesn't creep back
New search terms appear constantly, so a one-time cleanup decays. Pick a cadence that matches your spend. Weekly makes sense for high-spend accounts, and monthly is often enough for small ones. That's a suggestion, not a Google rule.
Keep the review short with a fixed checklist:
- Open the search terms report and sort by cost.
- Mark new junk using your one-sentence definition from Step 1.
- Add negatives at the right level and match type.
- Move good new terms to positive keywords.
- Check for conflicts between negatives and your keywords.
To measure whether it's working, compare the share of spend going to irrelevant terms, and your cost per conversion, before and after. Use your own account data and the same date length for both periods. Seasonality and bid changes can muddy the comparison, so note anything else you changed. If the review itself eats too much time, comparing Google Ads tools against manual optimization may help you decide where automation is worth it.
If you run an agency, standardize shared negative lists across clients for the universal junk like jobs and free-seekers, then allow per-client exceptions where a term is relevant for one business and not another. Keywordme offers multi-account and team support that may help here; confirm current features on its site before building a workflow around them. Our roundup of Google Ads optimization tools for agencies goes deeper on this.
Keep the Clean-Up Going After the First Pass
Give the changes a couple of weeks, then reopen the search terms report. You're checking two things: that spend on irrelevant terms is dropping, and that no good traffic got blocked along the way. If impressions on a core keyword fell sharply, look for a negative that overlaps it. Then put the review on the calendar and keep it there.
Optimize Google Ads Campaigns 10X Faster. Without Leaving Your Account. Keywordme lets you remove junk search terms, build high-intent keyword lists, and apply match types instantly, right inside Google Ads. No spreadsheets, no switching tabs, just quick, seamless optimization. Start your free 7-day trial (then just $12/month) and take your Google Ads game to the next level.